Home » Wi-Fi Routers Firmwares » TP Link Routers » Download Tp-Link firmware Access Point TL-WA901ND

Download Tp-Link firmware Access Point TL-WA901ND

Download Tp-Link firmware
Download Tp-Link firmware Access Point TL-WA901ND

Download Tp-Link firmware 450Mbps Wireless N Access Point TL-WA901ND, This one of the Hi Range and Hi-speed Data Sharing Tp-Link Wireless Router You can Use This Router For Video streaming, Online Gaming or Other Networking activities. Or Also You can All Type Download TP-Link Firmware From this Website.

450Mbps Wireless N Access Point TL-WA901ND

  • 450Mbps wireless transmission rate, brings smooth wireless N experience
  • Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
  • Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector

TP-Link 450Mbps Wireless N Access Point TL-WA901ND Specification

  • Interface One 10/100M Ethernet Port(RJ45), Support Passive PoE,
  • Button WPS/Reset, Power On/Off
  • Wireless IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
  • Frequency 2.4-2.4835GHz
  • Wireless Security 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
  • System Requirement Microsoft Windows XP, Vista, Windows 7, Windows 8
  • Supported Windows All

Download TP-Link Firmware 450Mbps Wireless N Access Point TL-WA901ND Overview and Installation Tips

The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use. Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not! Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Just you need to Download Tp-link Firmware From below-given link. Now save this file in your hard drive. Then open your router page and go to upgrade setting in menu. select downloaded file and click on upgrade button.  Now Your router going to upload and then auto go to restart.

Note:

  • Don’t Restart Router during tp-Link Firmware Upgrade process
  • Don’t Install Firmware via Wireless

TP-Link 450Mbps Wireless N Access Point TL-WA901ND Firmware Details

Manufacture
TP-Link firmware
Model
TP-Link TL-WA901ND
File Size
2.5 MB
Version
V1_100429_Beta
Source Via
Download V1 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA901ND v1
Download V2 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA901ND v2
Download V3 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA901ND v3
Download V4 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA901ND v4