Home » Wi-Fi Routers Firmwares » TP Link Routers » Download Tp-Link firmware Access Point TL-WA801ND

Download Tp-Link firmware Access Point TL-WA801ND

Download Tp-Link firmware
Download Tp-Link firmware Access Point TL-WA801ND

Download Tp-Link firmware 300Mbps Wireless N Access Point TL-WA801ND, This TP-Link Router have many types of option For Better Internet services. People Use for Video Streaming, Voice Streaming, and Online Gaming. Or Also You can All Type Download TP-Link Firmware From this Website.

300Mbps Wireless N Access Point TL-WA801ND

  • 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming
  • Supports multiple operation modes: Access Point, Multi-SSID, Client, Universal/WDS Repeater, Bridge with AP
  • Easily setup a WPA encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Passive Power over Ethernet Injector

TP-Link 300Mbps Wireless N Access Point TL-WA801ND Specification

  • Interface One 10/100M Ethernet Port(RJ45), Support Passive PoE,
  • Button Power On/Off Button, WPS Button, Reset Button
  • Wireless IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
  • Antenna 2*5dBi Detachable Omni Directional (RP-SMA)
  • Frequency 2.4-2.4835GHz
  • Wireless Security 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
  • System Requirement Microsoft Windows XP, Vista, Windows 7, Windows 8
  • Supported Windows All

Download TP-Link Firmware 300Mbps Wireless N Access Point TL-WA801ND Overview and Installation Tips

The TP-LINK Wireless N Access Point TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use. Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not! Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Just you need to Download Tp-link Firmware From below-given link. Now save this file in your hard drive. Then open your router page and go to upgrade setting in menu. select downloaded file and click on upgrade button.  Now Your router going to upload and then auto go to restart.

Note:

  • Don’t Restart Router during tp-Link Firmware Upgrade process
  • Don’t Install Firmware via Wireless

TP-Link 300Mbps Wireless N Access Point TL-WA801ND Firmware Details

Manufacture
TP-Link firmware
Model
TP-Link TL-WA801ND
File Size
2.4 MB
Version
V1_130131_beta
Source Via
Download V1 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA801ND v1
Download V2 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA801ND v2
Download V3 For WinXP/Vista/7/8/8.1/10
Download Tp-Link firmware Access Point TL-WA801ND v3